Products

>
Products > TFS-C SERIES CAM CLUTHCES(TFS8C-TFS90C)

TFS-C SERIES CAM CLUTHCES(TFS8C-TFS90C)

Model.

Torque Capacity
(N.m)

Max Overrunning Speedr/mm

Inner
Dia A
H7(mm)
Outer DiaB
h6(mm)
LenthC
(mm)
Inner Keyway
(mm)
Outer Keyway
(mm)
Inner Race
Outer Race
TSS12
32
 4500 2300
12
35
13
4x1.8
4x1.4
TSS15
34
 3500 1800
15
42
18
5x1.2
5x1.8
TSS17
60
 3200 1600
17
47
19
5x1.2
5x2.3
TSS20
100
 2500 1300
20
52
21
6x1.6
6x2.3
TSS25
154
 2000 1000
25
62
24
8x2.0
8x2.8
TSS30
270
 1600 800
30
72
27
8x2.0
10x2.5
TSS35
570
1400
 700
35
80
31
10x2.4
12x3.5
TSS40
728
1300
 650
40
90
33
12x2.2
12x4..1
TSS45
907
1100
 550
45
100
36
14x2.1
14x4.6
TSS50
1349
 1000 500
50
110
40
14x2.1
14x5.6
TSS60
2370
 840 420
60
130
46
18x2.3
18x5.5
TSS70
3017
750 380
70
150
51
20x2.7
20x6.9
TSS80
4370
670 340
80
170
58
22x3.1
20x7.5

Intallation and Usgae

1.The TSS Series Cam Clutch was designed for press fit installation.
correct interference dimensions must bu maintained to obtain maximum clutch performance.
The internal diameter of the housing should meet the H7 tolerance of the JIS standard. Refer to item 3 in the installtion and
usage of CSK Series Cam Clutches for information on the installation method.
2.Make sure the housing has enough stength to withstand the pressure required for the press fitting installation of the clutch.
3.When installing the clutch,mount it with a type 62 bearing to avoid radial force,since this clutch does not have any bearing inside.
4.The clutch should be mounted on the shaft by rotating it in the direction marked by the arrow shown on the clutch plate.
5.The recommended shaft tolerance is H7, and the key profile should be in accordance with the following standard.
TSS 8~12 ...... DIN 6885.1
TSS 15~60...... DIN 6885.3
6.Suitable surface pressure of the key should be selected according to your company design standards.

Lubrication
1.Oil lubrication is recommended.