Products

>
Products > MG SERIES CAM CLUTCHES(MG300-MG1300)

MG SERIES CAM CLUTCHES(MG300-MG1300)

Dimensions and capacities

Model

Max.Torque
(N.m)

Max.Overrunning Speed
(r/mm)

Stock Bore Size

A
B(h7)
C
Inner Race
Outer Race
DiaH7
Keyway
MG300
314
2800
900
19
5x2
63
77
60
MG400
539
2600
800
22
5x2
70
88
67
MG500
1620
2400
800
31.5
7x3
89
108
86
MG600
3140
2100
700
50
12x3.5
95
136
92
MG700
5880
1500
500
70
18x6
127
180
124
MG750
9510
1800
600
85
24x6
153
200
150
MG800
17600
1300
475
110
28x7
158
250
155
MG900
24500
1200
400
135
35x9
165
300
160
MG1000
33800
1200
325
160
38x10
188
370
180
MG1100
78400
350
-
185
45x14
260
470
250
MG1200
95100
300
-
200
45x14
260
500
250
MG1300
176400
250
-
250
56x17.5
280
600
260

Model
D
E
F
G
H-M Chip hole
lubricating oil
Oil(cc)
MG300
66
10.4
28.5
13
4xM6xP1.0
M6xP1.0
25
MG400
73
10.7
31.7
16
4xM8xP1.25
M6xP1.0
30
MG500
92
12.3
44.4
16
4xM8xP1.25
M6xP1.0
50
MG600
120
12.8
69.8
16
6xM8xP1.25
M6xP1.0
80
MG700
160
19.8
101.5
20
6xM10xP1.5
M6xP1.0
135
MG750
175
75
110
25
8xM14xP2.0
M8xP1.25
400
MG800
220
77.5
140
25
8xM16xP2.0
M8xP1.25
500
MG900
265
80
170
32
10xM16xP2.0
M8xP1.25
620
MG1000
325
90
200
32
12xM16xP2.0
M8xP1.25
850
MG1100
415
125
260
40
12xM20xP2.5
M12xP1.75
2900
MG1200
440
125
280
45
12xM24xP3.0
M12xP1.75
3000
MG1300
530
130
340
50
12xM30xP3.5
M12xP1.75
3800

Installation and Usage

Model
Tolerance
MG300,MG400
+0, -0.021
MG500,MG600
+0, -2.225
MG700
+0 -0.030
MG750,MG800
+0 -0.035
MG900,MG100
+0 -0.040
MG1100,MG1200,MG1300
+0 -0.046

1.MG Series Clutches consist of MG Series Cam Clutches and oil reservois.See "Installation and Usage" on page 25 for MG series
clutches.
2.These clutches are used for backstop applications.
3.Specify right hand (RH) or left hand(LH) drive of inner race viewed from the end marked with the arrow.
4.Prevent oil leakage from the shaft end by using an end plate with packing and sealed washers.Refer to the installation
drawing on the right.
5.When attcahing an oil reservoir, be sure to put packing in between the cam clutch end and oil reservoir. Position one of the
plugs of the Cam Clutch underneath as a drain and the oil reservoir plug directly above it.

Lubrication

1.Oil lubrication is recommended.
2.Do not use greases or lubricants with EP additives.