Products

>
Products > MZ SERIES CAM CLUTCHES(MZ15-MZ70)

MZ SERIES CAM CLUTCHES(MZ15-MZ70)

Dimensions and capacities

Model

Max.
Torque
(N.m)

Max.Speed

Max. Indexing Speed
Stock Bore Size
A
B
C
D
 E(m6)
F
 G H-M Hole
S
Inner
Outer
 Dia H7 Keyway
MZ15
186
1800
900
150
15
5x2.3
62
68
60
58
47
25
5.5
6xM5xP0.8
10
MZ17
215
1700
800
150
17
5x2.3
66
75
64
64
52
28
6.3
6xM5xP0.8
10
MZ20
323
1600
700
150
20
6x2.8
67
80
65
68
55
30
7.6
6xM6xP1.0
12
MZ30-22
735
1500
500
150
22
6x2.8
82
100
80
88
75
45
8.9
6xM8xP1.25
16
MZ30-25
25
8x3.3
MZ30
30
10x3.3
MZ35
1080
1400
300
150
35
10x3.3
87
110
85
95
80
50
8.7
6xM8xP1.25
16
MZ45-40
1620
1400
300
150
40
12x3.3
92
125
90
110
95
60
8.4
6xM8xP1.25
16
MZ45
45
14x3.8
MZ60-50
2110
1200
250
150
50
14x3.8
102
155
100
140
125
80
9.1
6xM8xP1.25
16
MZ60-55
55
16x4.3
MZ60
60
18x4.4
MZ70-65
3040
1100
250
150
65
18x4.4
105
175
103
145
145
95
8.6
6xM8xP1.25
16
MZ70
70
20x4.9

Installation and Usage
1.MZ Series Cam Clutches are shielded by shield bearings on both ends, packed with a special grease, and are ready for use. No additional lubricant is required.
2.For attaching pulleys, gears or sprockets to the clutches, insert hubs(with f6 tolerance of JIS standard) along the inner surface of the outer race and screw the bolts(high tension) into the tapped holes on the clutch end.
3.External thrust load should be supported by other devices, not by the Cam Clutch.
4.Use only a parallel key to secure the clutch to the shaft.Do not use a tapered key.
5.When mounting the clutch onto the shaft, apply pressure to the inner race end but never to the outer race.See the illustration on the right.
6.For vertical mounting, please consult STDIER.
7.Ambient temperature range is -5 to 40.
8.Key to be used should be in accordance with JIS B1301-1976 or ISO R773.


Lubrication
1.Oil lubrication is recommended.
2.Do not use greases or lubricants with EP additives.